fix: correct the driver matrix against netOrk v0.28.0
Audited the drivers that actually ship in v0.28.0 (vendor-drivers.txt at the tag, each driver package at its pin) instead of carrying the old table on. - Reboot: netOrk's reboot really restarts only OpenWrt and Proxmox. For every other driver the request reported success while nothing happened, so the column now says so. Rebooting through an update run is mentioned in a note. - Config push: OPNsense, ProCurve, TP-Link JetStream, Netgear Smart and Proxmox do get configuration written by netOrk; the column was missing them. - Zyxel is a VMG residential gateway, not a switch: no LLDP, VLANs or health, but SSIDs. Fritz!Box is read-only and has no health metrics. Proxmox has no Docker view. - netgear is two drivers, netgear_smart and netgear_plus. New: hpe_officeconnect, qnap_qts, yealink. - The built-in NAPALM drivers are installed but untested with netOrk and get none of its driver-specific features; the page no longer says "supported". - Notes explain the Health, LLDP, Config push and Reboot columns. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
Christian Manivong
co-authored by
Claude Opus 5.5
Claude Opus 5.5
parent
8aa158aa3b
commit
04c5c00280
+40
-18
@@ -142,18 +142,23 @@ const en = {
|
||||
{
|
||||
title: 'Supported Drivers',
|
||||
items: [
|
||||
'fritzbox — AVM Fritz!Box routers',
|
||||
'procurve — HP ProCurve / Aruba switches',
|
||||
'fritzbox — AVM Fritz!Box routers (read-only)',
|
||||
'hpe_officeconnect — HPE OfficeConnect 1820 / 1920S switches',
|
||||
'linux — Generic Linux servers',
|
||||
'netgear — Netgear switches',
|
||||
'netgear_plus — Netgear Plus switches (web UI)',
|
||||
'netgear_smart — Netgear Smart Managed Pro switches',
|
||||
'openmediavault — OpenMediaVault NAS',
|
||||
'openwrt — OpenWRT access points',
|
||||
'openwrt — OpenWrt routers and access points',
|
||||
'opnsense — OPNsense firewalls',
|
||||
'procurve — HPE ProCurve / Aruba switches',
|
||||
'proxmox — Proxmox VE hypervisors',
|
||||
'qnap_qts — QNAP NAS on QTS',
|
||||
'sonos — Sonos speakers',
|
||||
'tplink_jetstream — TP-Link Jetstream managed switches',
|
||||
'zyxel — Zyxel switches',
|
||||
'Plus all built-in NAPALM drivers: Cisco IOS / IOS-XE / NX-OS, Arista EOS, Juniper JunOS',
|
||||
'tplink_jetstream — TP-Link JetStream managed switches',
|
||||
'yealink — Yealink IP phones',
|
||||
'zyxel — Zyxel VMG routers',
|
||||
'A device can hold several roles at once, e.g. a QNAP is storage, hypervisor and Linux host',
|
||||
'Built-in NAPALM drivers (Cisco IOS / IOS-XE / NX-OS, Arista EOS, Juniper JunOS) are installed, but not tested with netOrk',
|
||||
],
|
||||
},
|
||||
{
|
||||
@@ -320,10 +325,16 @@ const en = {
|
||||
},
|
||||
drivers: {
|
||||
heading: 'Supported Devices',
|
||||
sub: 'netOrk ships with custom NAPALM drivers for 11 device types and supports all built-in NAPALM drivers. Capability availability varies by driver.',
|
||||
sub: 'netOrk ships with custom NAPALM drivers for 15 device types and can use the built-in NAPALM drivers. Capability availability varies by driver.',
|
||||
customHeading: 'Custom Drivers',
|
||||
napalmHeading: 'Built-in NAPALM Drivers',
|
||||
napalmSub: 'All standard NAPALM drivers are supported. Capabilities depend on the upstream NAPALM implementation.',
|
||||
napalmSub: 'The standard NAPALM drivers are installed and read facts, interfaces, LLDP and VLANs as far as the upstream implementation goes. They are not tested with netOrk and get none of its driver-specific features such as device roles, SNMP health metrics or configuration writes.',
|
||||
notes: [
|
||||
'Health: SNMP metrics (CPU, memory, interface counters); needs SNMP enabled on the device and a community configured in netOrk.',
|
||||
'LLDP on Linux, OpenMediaVault, QNAP and OPNsense needs lldpd (os-lldpd) installed on the host.',
|
||||
'Config push: netOrk writes configuration to the device, e.g. VLANs and ports on switches, UCI profiles on OpenWrt, DHCP, DNS and firewall rules on OPNsense, SDN VNets on Proxmox.',
|
||||
'Reboot: a reboot from netOrk actually restarts OpenWrt and Proxmox devices. OPNsense and Linux hosts can reboot as part of applying updates.',
|
||||
],
|
||||
},
|
||||
gettingStarted: {
|
||||
label: 'coming soon',
|
||||
@@ -556,18 +567,23 @@ const de: Translations = {
|
||||
{
|
||||
title: 'Unterstützte Treiber',
|
||||
items: [
|
||||
'fritzbox — AVM Fritz!Box Router',
|
||||
'procurve — HP ProCurve / Aruba Switches',
|
||||
'fritzbox — AVM Fritz!Box Router (nur lesend)',
|
||||
'hpe_officeconnect — HPE OfficeConnect 1820 / 1920S Switches',
|
||||
'linux — Generische Linux-Server',
|
||||
'netgear — Netgear Switches',
|
||||
'netgear_plus — Netgear Plus Switches (Web-UI)',
|
||||
'netgear_smart — Netgear Smart Managed Pro Switches',
|
||||
'openmediavault — OpenMediaVault NAS',
|
||||
'openwrt — OpenWRT Access Points',
|
||||
'openwrt — OpenWrt Router und Access Points',
|
||||
'opnsense — OPNsense Firewalls',
|
||||
'procurve — HPE ProCurve / Aruba Switches',
|
||||
'proxmox — Proxmox VE Hypervisoren',
|
||||
'qnap_qts — QNAP NAS mit QTS',
|
||||
'sonos — Sonos Lautsprecher',
|
||||
'tplink_jetstream — TP-Link Jetstream Managed Switches',
|
||||
'zyxel — Zyxel Switches',
|
||||
'Sowie alle integrierten NAPALM-Treiber: Cisco IOS / IOS-XE / NX-OS, Arista EOS, Juniper JunOS',
|
||||
'tplink_jetstream — TP-Link JetStream Managed Switches',
|
||||
'yealink — Yealink IP-Telefone',
|
||||
'zyxel — Zyxel VMG Router',
|
||||
'Ein Gerät kann mehrere Rollen zugleich haben, z. B. ist ein QNAP Storage, Hypervisor und Linux-Host',
|
||||
'Die integrierten NAPALM-Treiber (Cisco IOS / IOS-XE / NX-OS, Arista EOS, Juniper JunOS) sind installiert, aber nicht mit netOrk getestet',
|
||||
],
|
||||
},
|
||||
{
|
||||
@@ -734,10 +750,16 @@ const de: Translations = {
|
||||
},
|
||||
drivers: {
|
||||
heading: 'Unterstützte Geräte',
|
||||
sub: 'netOrk liefert eigene NAPALM-Treiber für 11 Gerätetypen und unterstützt alle integrierten NAPALM-Treiber. Der Funktionsumfang variiert je nach Treiber.',
|
||||
sub: 'netOrk liefert eigene NAPALM-Treiber für 15 Gerätetypen und kann die integrierten NAPALM-Treiber nutzen. Der Funktionsumfang variiert je nach Treiber.',
|
||||
customHeading: 'Eigene Treiber',
|
||||
napalmHeading: 'Integrierte NAPALM-Treiber',
|
||||
napalmSub: 'Alle Standard-NAPALM-Treiber werden unterstützt. Der Funktionsumfang hängt von der jeweiligen NAPALM-Implementierung ab.',
|
||||
napalmSub: 'Die Standard-NAPALM-Treiber sind installiert und lesen Fakten, Interfaces, LLDP und VLANs, soweit die jeweilige Implementierung das hergibt. Mit netOrk getestet sind sie nicht, und die treiberspezifischen Funktionen – Geräterollen, SNMP-Health-Metriken, Konfiguration schreiben – bekommen sie nicht.',
|
||||
notes: [
|
||||
'Health: SNMP-Metriken (CPU, Speicher, Interface-Zähler); setzt aktiviertes SNMP am Gerät und eine in netOrk hinterlegte Community voraus.',
|
||||
'LLDP auf Linux, OpenMediaVault, QNAP und OPNsense setzt ein installiertes lldpd (os-lldpd) auf dem Host voraus.',
|
||||
'Config push: netOrk schreibt Konfiguration aufs Gerät, etwa VLANs und Ports auf Switches, UCI-Profile auf OpenWrt, DHCP, DNS und Firewallregeln auf OPNsense, SDN-VNets auf Proxmox.',
|
||||
'Reboot: Ein Neustart aus netOrk startet OpenWrt- und Proxmox-Geräte tatsächlich neu. OPNsense und Linux-Hosts können beim Einspielen von Updates neu starten.',
|
||||
],
|
||||
},
|
||||
gettingStarted: {
|
||||
label: 'demnächst verfügbar',
|
||||
|
||||
+18
-11
@@ -19,17 +19,21 @@ interface Driver {
|
||||
}
|
||||
|
||||
const DRIVERS: Driver[] = [
|
||||
{ name: 'fritzbox', deviceType: 'AVM Fritz!Box routers', facts: '✓', interfaces: '✓', lldp: '—', vlans: '—', ssids: '✓', health: '✓', docker: '—', reboot: '✓', configPush: '—', status: 'stable' },
|
||||
{ name: 'procurve', deviceType: 'HP ProCurve / Aruba switches', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '✓', configPush: '—', status: 'stable' },
|
||||
{ name: 'linux', deviceType: 'Generic Linux servers', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '—', ssids: '—', health: '✓', docker: '✓', reboot: '✓', configPush: '—', status: 'stable' },
|
||||
{ name: 'netgear', deviceType: 'Netgear switches', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '—', configPush: '—', status: 'beta' },
|
||||
{ name: 'openmediavault', deviceType: 'OpenMediaVault NAS', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '—', ssids: '—', health: '✓', docker: '✓', reboot: '✓', configPush: '—', status: 'stable' },
|
||||
{ name: 'openwrt', deviceType: 'OpenWRT access points', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '✓', health: '✓', docker: '—', reboot: '✓', configPush: '✓', status: 'stable' },
|
||||
{ name: 'opnsense', deviceType: 'OPNsense firewalls', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '✓', configPush: '—', status: 'stable' },
|
||||
{ name: 'proxmox', deviceType: 'Proxmox VE hypervisors', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '✓', reboot: '✓', configPush: '—', status: 'stable' },
|
||||
{ name: 'sonos', deviceType: 'Sonos speakers', facts: '✓', interfaces: '✓', lldp: '—', vlans: '—', ssids: '—', health: '—', docker: '—', reboot: '—', configPush: '—', status: 'beta' },
|
||||
{ name: 'tplink_jetstream', deviceType: 'TP-Link Jetstream switches', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '✓', configPush: '—', status: 'stable' },
|
||||
{ name: 'zyxel', deviceType: 'Zyxel switches', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '✓', configPush: '—', status: 'beta' },
|
||||
{ name: 'fritzbox', deviceType: 'AVM Fritz!Box routers (read-only)', facts: '✓', interfaces: '✓', lldp: '—', vlans: '—', ssids: '✓', health: '—', docker: '—', reboot: '—', configPush: '—', status: 'stable' },
|
||||
{ name: 'hpe_officeconnect', deviceType: 'HPE OfficeConnect 1820 / 1920S switches', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '—', docker: '—', reboot: '—', configPush: '—', status: 'beta' },
|
||||
{ name: 'linux', deviceType: 'Generic Linux servers', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '—', ssids: '—', health: '✓', docker: '✓', reboot: '—', configPush: '—', status: 'stable' },
|
||||
{ name: 'netgear_plus', deviceType: 'Netgear Plus switches (web UI)', facts: '✓', interfaces: '✓', lldp: '—', vlans: '✓', ssids: '—', health: '—', docker: '—', reboot: '—', configPush: '—', status: 'beta' },
|
||||
{ name: 'netgear_smart', deviceType: 'Netgear Smart Managed Pro switches', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '—', configPush: '✓', status: 'beta' },
|
||||
{ name: 'openmediavault', deviceType: 'OpenMediaVault NAS', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '—', ssids: '—', health: '✓', docker: '✓', reboot: '—', configPush: '—', status: 'stable' },
|
||||
{ name: 'openwrt', deviceType: 'OpenWrt routers and access points', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '✓', health: '✓', docker: '—', reboot: '✓', configPush: '✓', status: 'stable' },
|
||||
{ name: 'opnsense', deviceType: 'OPNsense firewalls', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '—', configPush: '✓', status: 'stable' },
|
||||
{ name: 'procurve', deviceType: 'HPE ProCurve / Aruba switches', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '—', configPush: '✓', status: 'stable' },
|
||||
{ name: 'proxmox', deviceType: 'Proxmox VE hypervisors', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '✓', configPush: '✓', status: 'stable' },
|
||||
{ name: 'qnap_qts', deviceType: 'QNAP NAS on QTS', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '—', ssids: '—', health: '—', docker: '✓', reboot: '—', configPush: '—', status: 'beta' },
|
||||
{ name: 'sonos', deviceType: 'Sonos speakers', facts: '✓', interfaces: '✓', lldp: '—', vlans: '—', ssids: '—', health: '—', docker: '—', reboot: '—', configPush: '—', status: 'beta' },
|
||||
{ name: 'tplink_jetstream', deviceType: 'TP-Link JetStream switches', facts: '✓', interfaces: '✓', lldp: '✓', vlans: '✓', ssids: '—', health: '✓', docker: '—', reboot: '—', configPush: '✓', status: 'stable' },
|
||||
{ name: 'yealink', deviceType: 'Yealink IP phones', facts: '✓', interfaces: '—', lldp: '—', vlans: '—', ssids: '—', health: '—', docker: '—', reboot: '—', configPush: '—', status: 'beta' },
|
||||
{ name: 'zyxel', deviceType: 'Zyxel VMG routers', facts: '✓', interfaces: '✓', lldp: '—', vlans: '—', ssids: '✓', health: '—', docker: '—', reboot: '—', configPush: '—', status: 'beta' },
|
||||
]
|
||||
|
||||
const NAPALM_BUILTIN = ['Arista EOS', 'Cisco IOS', 'Cisco IOS-XE', 'Cisco NX-OS', 'Juniper JunOS']
|
||||
@@ -103,6 +107,9 @@ export default function Drivers() {
|
||||
</tbody>
|
||||
</table>
|
||||
</div>
|
||||
<ul className="mt-4 space-y-1 text-xs text-slate-500">
|
||||
{t.drivers.notes.map((n) => <li key={n}>{linkify(n)}</li>)}
|
||||
</ul>
|
||||
</div>
|
||||
|
||||
<div>
|
||||
|
||||
+3
-3
@@ -10,9 +10,9 @@ import { useLang } from '../context/LangContext'
|
||||
import { linkify } from '../lib/glossary'
|
||||
|
||||
const DRIVERS = [
|
||||
'Arista EOS', 'Cisco IOS', 'Cisco IOS-XE', 'Cisco NX-OS', 'Fritz!Box',
|
||||
'HP ProCurve / Aruba', 'Juniper JunOS', 'Linux', 'Netgear', 'OpenMediaVault',
|
||||
'OpenWRT', 'OPNsense', 'Proxmox VE', 'Sonos', 'TP-Link Jetstream', 'Zyxel',
|
||||
'Fritz!Box', 'HPE OfficeConnect', 'HPE ProCurve / Aruba', 'Linux', 'Netgear',
|
||||
'OpenMediaVault', 'OpenWrt', 'OPNsense', 'Proxmox VE', 'QNAP QTS', 'Sonos',
|
||||
'TP-Link JetStream', 'Yealink', 'Zyxel VMG',
|
||||
]
|
||||
|
||||
function BrowserFrame({ label, children }: { label: string; children: React.ReactNode }) {
|
||||
|
||||
Reference in New Issue
Block a user